Hi All,
I have several 9951's that I've added to CME 9.0. Users of SCCP phones are used to use the Speed Dial softkey. I need this same functionality for these SIP phones.
I've read the Feature Policy Soft Key Control section in the Administation Guide and haven't been able to figure out how to enable the Speed Dial softkey. I was able to manually modify the featurePolicy1.xml file which enable the Speed Dial button. Unfortunatly once I entered the command Create Profile the file was overwritten an dresorted back to the default which removed the Speed Dial button.
What step am I missing??
Thanks in advance for your assistance!!!
Below is a portion of the relavent configuration.
voice register template 1
button-layout 1 line
button-layout 2-3 speed-dial
button-layout 4 blf-speed-dial
softkeys hold Newcall Resume iDivert
softkeys idle Newcall Cfwdall DND Redial
softkeys ringIn Answer DND iDivert
softkeys seized Endcall Meetme Cfwdall Redial Pickup Gpickup
softkeys connected Endcall Confrn Hold Park Trnsfer iDivert
softkeys remote-in-use Newcall Barge cBarge
conference drop-mode creator
!
voice register pool 5
fastdial 1 8008 name 8008
id mac 001D.70FB.4B72
type 9951
number 1 dn 5
template 1
dtmf-relay sip-notify
username C9951 password 12345
codec g711ulaw
no vad
paging-dn 25
camera
video
no keep-conference