have CCM5 at the main office. then a remote location with 20 users. i'd like to take an existing cme 4.0 system to those users but have then registered with the main system first then the cme if WAN fails. i know its supported and im trying it right now.
i create a device pool for that branch and specified the srst reference as the ip add. before that i registed the router as an H323 gateway (MGCP on ccm 5.0.4 has some issues :() i then have a full ccme system configured with the addition of the srst mode provision none and templates for ephone and dn configured.
when i plu the phones in, the phone always registers with the local gateway, the CME. am i missing something?
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...