Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME TEHO

Hello,

Can I get some help on how to get two CME sites to do TEHO with each other. I have an office in Macau and one in Singapore both with CME and they want to do TEHO between the two.

Here is what I have so far:

Macau Router

dial-peer voice 65 voip

description TEHO For Singapore Numbers

preference 1

destination-pattern 900165........

voice-class codec 1

voice-class h323 1

session target ipv4:192.168.75.1

dtmf-relay h245-alphanumeric

ip qos dscp cs5 media

no vad

!

Singapore Router

dial-peer voice 65 pots

destination-pattern 900165........

port 0/0/0:15

forward-digits 9

prefix 9

!

dial-peer voice 165 voip

destination-pattern 900165........

voice-class codec 1

voice-class h323 1

session target ipv4:192.168.75.1

dtmf-relay h245-alphanumeric

ip qos dscp cs5 media

no vad

!

Not sure which of these to use or if they are even correct....

btw, we don't have a gatekeeper.

1 REPLY
Hall of Fame Super Gold

Re: CME TEHO

Duplicate thread already replied.

106
Views
0
Helpful
1
Replies
CreatePlease to create content