Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME & Third party SIP phones

Folks,

do you have some document that will let you know how to register third party SIP phones (polycom sound ip 330) with CME version 4.2

thank you

Cris

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CME & Third party SIP phones

Hi Cris,

It looks like this:

voice service voip

sip

registrar server

voice register global

mode cme

source-address 1.1.1.1 port 5060

max-dn X

max-pool X

voice register dn 1

number 1000

voice register pool 1

id mac XXXX.XXXX.XXXX

type ! If it's 3rd party, omit this

number 1 dn 1

username X password X ! Required if IP phone's address is on different subnet than SIP CME source address

This is the minimum required configuration for SIP CME.

By the way, it's not officially TAC supported, but you can usually get it to work anyway.

hth,

nick

2 REPLIES

Re: CME & Third party SIP phones

Hi Cris,

It looks like this:

voice service voip

sip

registrar server

voice register global

mode cme

source-address 1.1.1.1 port 5060

max-dn X

max-pool X

voice register dn 1

number 1000

voice register pool 1

id mac XXXX.XXXX.XXXX

type ! If it's 3rd party, omit this

number 1 dn 1

username X password X ! Required if IP phone's address is on different subnet than SIP CME source address

This is the minimum required configuration for SIP CME.

By the way, it's not officially TAC supported, but you can usually get it to work anyway.

hth,

nick

New Member

Re: CME & Third party SIP phones

thank you

1399
Views
0
Helpful
2
Replies