Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CME to CME through gatekeeper silent call

Hi,

Kindly I have DN 601 & 602 registered to CME 1

And 501 & 502 registered to CME 2

Both CMEs talk to each other through a GK

Both CMEs are registered to the GK

GK#sh gatekeeper endpoints

GATEKEEPER ENDPOINT REGISTRATION

================================

CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags

--------------- ----- --------------- ----- --------- ---- -----

10.1.10.1 1720 10.1.10.1 63536 GK VOIP-GW

H323-ID: CME1@cisco.com

E164-ID: 501

E164-ID: 502

Voice Capacity Max.= Avail.= Current.= 0

10.2.10.1 1720 10.2.10.1 54112 GK VOIP-GW

H323-ID: CME2@cisco.com

E164-ID: 601

E164-ID: 602

Voice Capacity Max.= Avail.= Current.= 0

Total number of active registrations = 2

The case is that I can call from CME1 to CME2 and vise versa but there is no sound at all

Always silent call

CME1 & CME2 & GK are connected to the same switch on a lab

No firewalls nor routing issues

thanks for your help

4 REPLIES

Re: CME to CME through gatekeeper silent call

yes

I found this issue when I tried to call from CME1 to CME2 but the call give fast busy

So it was CME1 cann't ping CME2 so I added the needed routes

Now all can ping

So the call successfully ring the other side

but no sound

thanks for your care

Hall of Fame Super Gold

Re: CME to CME through gatekeeper silent call

Begin making calls without GK.

After that is successful you can move on.

Re: CME to CME through gatekeeper silent call

Hi,

This morning,after powering on the 3-routers and the switch, I can hear the other site !!)

Thanks alot for your help paolo

Hall of Fame Super Gold

Re: CME to CME through gatekeeper silent call

Can ping from CME 1 to 2 ?

189
Views
4
Helpful
4
Replies
CreatePlease to create content