Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

CME to CUCM as a H323 GW

Hi All,

I have a small remote site that has a 2851 runnning CME 7 and wish to get the phones to register to a CUCM (v7.1)in London. Currently the PSTN connections are 5 x FXO ports that have PLAR OPX configured to reception x100. The CME will be registered as an H323 gateway as we are using analogue ports.

My question is how do I configure the FXO ports and dial peers to ring the reception dn once it is configured on CUCM? Can I use PLAR OPX and create a dial-peer with that pattern pointing to CUCM, or should I use translation patterns to amend the called number on the ports?

Any help and or example configs for the H323 GW would be appreciated.

Thanks,

Phil

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CME to CUCM as a H323 GW

Just plar to a number the CUCM can handle, and of course have DP covering it.

2 REPLIES
Hall of Fame Super Gold

Re: CME to CUCM as a H323 GW

Just plar to a number the CUCM can handle, and of course have DP covering it.

Bronze

Re: CME to CUCM as a H323 GW

Just tested using PLAR and it worked that's great thanks, it's

much appreciated!

Cheers,

Phil

685
Views
0
Helpful
2
Replies