Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME to MGCP Migration

Hi,

I have a legacy voice gateway running CME, we need to convert this voice gateway from CME to MGCP. I've had a look online but can't find any reference documents which outlines any process I should follow.

Is there any Cisco article I can reference for guidance?

Thanks

3 REPLIES
Cisco Employee

CME to MGCP Migration

What you're saying makes no sense at all, CME is a call control agent, MGCP is a master slave protocol for T1/E1/FXO/FXS/etc for which you need a master (CUCM)

HTH


java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

CME to MGCP Migration

Hi Jaime,

I have a VG running CCME, within our CUCM Cluster its registered as a H.323 gateway but we need to migrate the gateway from using the CCME/H.323 to our standard which is MGCP.

If we wanted to re-register the gateway as a MGCP one, would it just be a case of enabling MGCP and re-registering the gateway? Assuming we've configured the phones etc in CUCM.

Cisco Employee

CME to MGCP Migration

OK, that makes more sense.

Yes, remove the H323 config and reconfigure as MGCP, there are no migration guides, just guides on how to configure one or the other, all is available on cisco.com

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
120
Views
0
Helpful
3
Replies
CreatePlease to create content