CME transfer to another CME and back to original CME
Here's the scenario.
A call comes in from the PSTN (site 1). The Call is set to forward to a user across the WAN to another CME System (using PLAR for example, to site 2).
The Person picks up the phone (site 2) and transfers the call to another IP phone in the original CME (site 1).
Assuming H.450 is setup, does the end state have the media stream within site 1 only? (from the router/pstn to the IP Phone the call was transfered to in Site 1).
The call is NOT hair-pinned right? It does NOT traverse the WAN right?
I'm fairly certain H.450 or even Cisco proprietary transfer doesn't hair-pin the call, but I need to make 100% certain it doesn't!
I believe hair-pin only occurs in devices that don't support either H.450 or Cisco proprietary transering methods.
The reason I'm asking is because I have a customer that is looking at centralizing their reception and doesn't want calls traversing the WAN when they are transfered back to the original site the call came in on.
Re: CME transfer to another CME and back to original CME
This depends on a couple different factors, IOS version, CME version, command set applied. Can you post the two routers configurations so we can give our input?
High level, H.450.2 and SIP REFER, provide a direct post-transfer call between the Transferee and the Transfer-to. So in your example (Site 1 Phone 1 Transferee <-> Site 1 Phone 2 Transfer-to) and wouldn't take up WAN bandwidth like a Hairpin call would.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4