CME Translation Rule issue

[GHARIP MOHAMED MARZOK]

i have CME run om 3945 router with IOS c3900-universalk9-mz.SPA.152-4.M2.bin and we apply translation rule for the incoming and the outgoing calls through E1 and we configured the translation profile under the dial peers , the issue is every random period of time and always we face it first working day after the weed end that the translation profile under the dial peers removed automatically and the calls can't done , so every time we have to reconfigure the translation profile under the dial peer , any one can help ?   

[Tagir Temirgaliyev]

did you

wr mem

are you shure router was not reloaded ?

what is ib logg?

sh logg

sh inv

sh ver

sh runn

[GHARIP MOHAMED MARZOK]

sure we saved , and find attached show ver  and show inv output but i don't have now sh logg  

[Carlo Poggiarelli]

Hi.

Can you please also share your running config?

Thanks 

Regards

Carlo 

[GHARIP MOHAMED MARZOK]

kindly find attached , 

i am planing to upgrade the IOS version , is there any recommendation about it to not face any  problem with the configuration or files on the flash or the router license ,

thanks ....

[Tagir Temirgaliyev]

it looks like your outgoing calls go throw fxo cards not e1

and incoming too

may be somebody can see better

[GHARIP MOHAMED MARZOK]

no , it is going through the E1