Been trying to get the correct translation-rules, but it seems not to be as easy as its on the guide..
I got some going, but I'm still having issues with the outgoing call.. The carrier requires that number format 1-XXX-XXX-XXXX, however I have a 9 for outside calls, and call are still going with 9xxxx no mater how a change the combinations..
I'm having some troube of getting the 911 service configured as well.. extensions are 10,11,12,13,14 and main number is (not actual#) 2013010000 which I need to dispaly on the all outbound calls, and 911, 411 dp if possible.. This is my current config (don't ) :
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...