Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME trunk to Callmanager

Hi All,

I have a customer that has 2 clusters, one CME cluster and one CUCM 6.1 cluster. They do NOT plan to migrate the CME users across to CUCM.

What is the easiest trunk to setup that will allow CME users to call CUCM users and vice versa??

Would be great if there are detailed instructions or examples on how to do this.

I have spent a lot of time on this already but i'm new to this so would appreciated anyone's help.

Cheers,

Hunt

7 REPLIES
Green
New Member

Re: CME trunk to Callmanager

Hi gogasca,

So i can just configure the CME as a 'normal' H323 gateway?? On CME, i just need voip dial-peer like normal?? I don't need any special commands on CME??

Would appreciated your help.

Cheers,

Hunt

Green

Re: CME trunk to Callmanager

Hi Hunt,

Correct, under CCMAdmin, configure H.323 GW in CUCM using CME IP addr.

Correct regular...dial-peer

New Member

Re: CME trunk to Callmanager

If I can ask a related question, on the CME router...do I need to add separate dial peer stements for each one of the CUCM IP addresses for each member of the cluster if I want redundancy?

Thanks, Mary

New Member

Re: CME trunk to Callmanager

If I can ask a related question, on the CME router...do I need to add separate dial peer stements for each one of the CUCM IP addresses for each member of the cluster if I want redundancy?

Thanks, Mary

Green

Re: CME trunk to Callmanager

yes.

Preference command will be needed

New Member

Re: CME trunk to Callmanager

I am going to be setting up a trunk between my Callmanager 6 and a CME 4.0 at a remote office. I currently use MGCP for all of my PSTN connections at this location. Will using H.323 for the trunk to the CME and MGCP for the trunks to PSTN cause problems? I couldn't really gather a straight answer from the document provided.

Thanks,

Chris

243
Views
5
Helpful
7
Replies