Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME using E1 8 channels use a channel for an ISDN device?

Hi, not sure if its possible but I'll try to explain.

A customer of ours has a Call Manager Express with an E1 and 8 channels on the ISDN 30 that we put in. My question is, is it possible to provide off the 8 channels a dedicated channel for a separate ISDN device? So 7 channels for the phone system and a channel for an ISDN device? The ISDN device is something to do with a security system a company uses to connect in to view the cameras ?

Any help would be greatly appreciated.

Thanks,

Craig.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CME using E1 8 channels use a channel for an ISDN device?

Hi Craig,

There will be no way to strip out 1 of the 8 channels that I know of.

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: CME using E1 8 channels use a channel for an ISDN device?

Hi Craig,

There will be no way to strip out 1 of the 8 channels that I know of.

Hope this helps!

Rob

New Member

Re: CME using E1 8 channels use a channel for an ISDN device?

Thanks for letting me know Rob.

Hall of Fame Super Red

Re: CME using E1 8 channels use a channel for an ISDN device?

Hey Craig,

You are most welcome buddy! We always get these strange requests don't we ;-)

Cheers!

Rob

135
Views
0
Helpful
3
Replies