Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME Version 8.6 and cisco jabber

Hi

We have a cme version 8.6 and we are wondering if we can configure a cisco jabber into our mobile phones

We have android platforms and iphone

Thank you                  

3 ACCEPTED SOLUTIONS

Accepted Solutions

Re: CME Version 8.6 and cisco jabber

Hi

Sure you can.

You have to define it as registrer pool.

Here you have an example.

voice register dn  1

number 2000

name Carlo-Jabber 2000

!

voice register pool  1

registration-timer max 720 min 660

id mac 1234.5678.0987

session-transport tcp

type Jabber-Android

number 1 dn 1

username carlo password cisco

codec g711ulaw

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Re: CME Version 8.6 and cisco jabber

Hi

In addition to the professional configuration of Mr/Carlo , Please also find the below document which shows you that V8.6 support jabber + required configuration.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1063949

Thank you

Please rate all useful information

CME Version 8.6 and cisco jabber

Hi.

Iphone is the only mobile phone supported by UC5XX because of the release of CME they run.

https://supportforums.cisco.com/docs/DOC-9827

CiscoMobile-iOS is the right device type

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
11 REPLIES

Re: CME Version 8.6 and cisco jabber

Hi

Sure you can.

You have to define it as registrer pool.

Here you have an example.

voice register dn  1

number 2000

name Carlo-Jabber 2000

!

voice register pool  1

registration-timer max 720 min 660

id mac 1234.5678.0987

session-transport tcp

type Jabber-Android

number 1 dn 1

username carlo password cisco

codec g711ulaw

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"

Re: CME Version 8.6 and cisco jabber

Hi

In addition to the professional configuration of Mr/Carlo , Please also find the below document which shows you that V8.6 support jabber + required configuration.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1058022

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wp1063949

Thank you

Please rate all useful information

Community Member

CME Version 8.6 and cisco jabber

Carlo and Islam

Thank you so much

What about UC540 .Its the same philosophy as the above right?

What about if in the type : the cisco jabber is not available and is available only the CiscoMobile-iOS

We have to upgrade the ios  right?

CME Version 8.6 and cisco jabber

Hi.

Iphone is the only mobile phone supported by UC5XX because of the release of CME they run.

https://supportforums.cisco.com/docs/DOC-9827

CiscoMobile-iOS is the right device type

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
Community Member

CME Version 8.6 and cisco jabber

Carlo

so the only option into UC540 is for iphone only?

CME Version 8.6 and cisco jabber

Hi.

For the roadmap I posted above, it seems so

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
Community Member

CME Version 8.6 and cisco jabber

Ok clear

From the config i dont see also any other device type for example sip device type for any other sip application

So assume that is not supported also any other sip application

CME Version 8.6 and cisco jabber

Hi

For above configuration of type Jabber-Android.  Here we specify the sip client type. It can either be CiscoMobile-iOS for Apple iPhone users or Jabber-Android for Android users

Thank you

Please rate all useful information

Community Member

CME Version 8.6 and cisco jabber

iSLAM

Is available only the CiscoMobile-iOS for our device so for android is not any option

That is clear

What i am wondering if we could use other application than jabber with sip profile configuration

but as i see is not any option for sip device except teh default for jabber (either iphone or android)

CME Version 8.6 and cisco jabber

Hi

ohhh , so under type there is no jabber-android. How can if you use CME v8.6 , this will not work if you assign sip application , should mention on type jabber-android.you can try , and i will search for you about files for jabber should be on your flash , to enable jabber-android.

Thank you

Please rate all useful infromation

CME Version 8.6 and cisco jabber

Hi

I think jabber-android only availble on V9 , but i will search about v8.6

Thank you

Please rate all useful information

242
Views
0
Helpful
11
Replies
CreatePlease to create content