Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME with 7915 expansion module

Hi Guys,i have 7962 phone attached to it two 7915 modules each with 12 buttons so the total is 24 buttons.

what is the configuration commands needed to show the 2nd page on each module?I mean i need to add more than 24 speed dials .

Thanks in advance.

2 ACCEPTED SOLUTIONS

Accepted Solutions

CME with 7915 expansion module

Hall of Fame Super Gold

Re: CME with 7915 expansion module

As CLI question mark would have hinted, and as explained in manual:

type xxx addon 1 7915-24 2 7915-24

5 REPLIES

CME with 7915 expansion module

New Member

CME with 7915 expansion module

Thanks for the help.Good post.

Hall of Fame Super Gold

Re: CME with 7915 expansion module

As CLI question mark would have hinted, and as explained in manual:

type xxx addon 1 7915-24 2 7915-24

New Member

CME with 7915 expansion module

Thanks but i didn't find something noted in cme guide that i have to use 24 instead of 12 to make it works.

Hall of Fame Super Gold

Re: CME with 7915 expansion module

It should have been in command reference, but it's even there. But in some document must be.

Thank you for the nice rating and good luck!

213
Views
0
Helpful
5
Replies
CreatePlease login to create content