Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME with HWIC-4ES-POE

hi,

I have installed the HWIC-4ES-POE in a CME 2821 ISR , but not getting power on my IP Phones. Any ideas why?

3 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

Re: CME with HWIC-4ES-POE

Do you have the POE PS for the 2821 ? That is optional. Do show environment to check.

Hope this helps, please rate post if it does!

Re: CME with HWIC-4ES-POE

You should get an AC-IP power supply

Hall of Fame Super Gold

Re: CME with HWIC-4ES-POE

Would you consider rating useful posts for this or a next time ?

6 REPLIES
Hall of Fame Super Gold

Re: CME with HWIC-4ES-POE

Do you have the POE PS for the 2821 ? That is optional. Do show environment to check.

Hope this helps, please rate post if it does!

Re: CME with HWIC-4ES-POE

You should get an AC-IP power supply

New Member

Re: CME with HWIC-4ES-POE

Can you please show me a link on how the AC-IP connects to the 2851 router. Any documentation will be helpfull.

Hall of Fame Super Gold

Re: CME with HWIC-4ES-POE

The blessed manual:

http://cisco.com/en/US/products/ps5854/products_installation_guide_chapter09186a00802c5ad8.html#wp1146977

As a recognition to those providing answers, please rate all useful posts using the scrollbox below!

New Member

Re: CME with HWIC-4ES-POE

Thanks all

Hall of Fame Super Gold

Re: CME with HWIC-4ES-POE

Would you consider rating useful posts for this or a next time ?

377
Views
0
Helpful
6
Replies
CreatePlease to create content