CME WITH PSTN to CME without PSTN.

[rammany19]

i have 2 sites named A and B

Site A has CME and PSTN.

Site B has CME no PSTN.

What I want is to make CME to CME calls and Site B can call PSTN located @ Site A.

Is it by just pointing to SITE A IP address, I will achieve this?

[rammany19]

Site A is pointing to the SIP server which is

sip-ua

retry register 10

registrar ipv4:209.15.1.1 expires 60

sip-server ipv4:209.15.1.1

!

!

dial-peer voice 1001 voip

translation-profile outgoing profile1

destination-pattern 7T

session protocol sipv2

session target sip-server

Dialing to the sip server is working on site A but Site B needs to connect to site A to dial to the sip server.

Note: Site B does not have a public IP so it need to connect to site A.

What and what do I need to config on site B.

Please reply ASAP. Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

Its working now.

But there is a problem.

I am pointing to a SIP server from Site A, but now I want users on Site B to point to Site A using the SIP server.

On Site A;

Sip-ua

Retry registrar 10

Registrar ipv4:

Now I want Site B to point to A for SiP connection.

Thanks

[rammany19]

hello

plz is this command going to be in both routers?

voice service voip

allow-connection sip to sip

allow-connection sip to h323

allow-connection h323 to sip

allow-connection sip to h323

H323

Sip