i have CME v4.1 running on 2621XM (adventerprisek9-mz.124-15.T13), i have direct internet connection on fa0/1 (Public IP address,not NAT)
i can call outside numbers without any problem ,sometimes i also can receive calls from the outside and sometimes it doesn't work, i just got the from the callingphone (that this numer is not online , or the call ended by the other party)
i add the " keepalive target" in sip-ua config to keep router connected all the time to the SIP SP, and now i have another issue , when i can my number it does ring and when i pickup the router send OK messages to the SP but without any ACKs so the calling party still showing ringing and after 25 sec the call end.
when it does work randomly and i hanged the call from my 7970 phone i got this
CME# May 31 19:29:00.792: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Sent: SIP/2.0 481 Call Leg/Transaction Does Not Exist Via: SIP/2.0/UDP 18.104.22.168:5060;branch=z9hG4bK8b348f9bf1e64ae6a9fdcedbdf1c4d2f From: <sip:firstname.lastname@example.org:5060>;tag=4e0113ac4bf5342044db98 To: <sip:sam72844@myip:5060>;tag=A7AA24-E0A Call-ID: 6e405c47fcb540a38063967607c3ce73 CSeq: 8 BYE Content-Length: 0
and then the system goes kind of offline and doesn't receive any more calls, after a period of time or by reloading the router i go back to point zero.
here is the config and debug ccsip messages when the call is being received
in the debug file you'll see "my ip " and "number" i just edited these 2 entries for privacy
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...