Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME with VIC-4FXS/DID

Dear all,

I have a 2811 router with Callmanager Express. I am using a VIC-4FXS/DID card for Direct Inward Dial Call.

What is the procedure for setup DID?

Thanks.

2 REPLIES
Hall of Fame Super Gold

Re: CME with VIC-4FXS/DID

Hi,

I assume you will be connecting this to a PBX configured for did. The configuration is as:

http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a0080106d1b.html

I can just add that if you have more than one line going to the PBX, you might find useful configuring trunk groups.

New Member

Re: CME with VIC-4FXS/DID

I find that there is tcl script which provide did function for ccme. Is this work?

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2303.html

364
Views
0
Helpful
2
Replies