Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME

Hi there !

In CM 4.2 there's a FAC (Forced Authorization Code) for each user that is allowed to place external calls..

Does CME has the same feature ?

Thanks.

Andrei.

3 REPLIES

Re: CME

Hi Andrei,

You can use Call Blocking Override. Take a look at the admin guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1013708

Hope it helps you.

Best regards,

- Adrián.

Cisco Employee

Re: CME

no, most similar is a script

PLEASE use the SEARCH function in netpro, this has been asked many, many, many times before

IP Telephony: Dial using pin number

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cd235cb/1#selected_message

IP Telephony: CME- How can i make outgoing PSTN calls only with a key like FAC (in cucm)

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc2c634

And there are many other posts on the exact same matter

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Anonymous
N/A

Re: CME

Andrei,

Try this;

application
service clid clid_authen_collect
  param uid-len 4
  param pin-len 4

On your dial peers add this command;

service clid_authen_collect

Vikram

240
Views
0
Helpful
3
Replies
CreatePlease to create content