My customer has a small size office where they want to deploy a Cisco 3945 Cisco CME router with CUE but they have the following questions:-
Q1. Can the CME router do the "Route List" feature like CUCM, where my CME router will have 2 x T1s, with Group A users use the 1st T1 for all outbound calls, and Group B users use the 2nd T1 for all of their outbound calls?
Q2. Can the CME router be multi-tenanted where i can setup an Admin User A, who only can do Add/Change/Remove on Group A of IP Phones, while Admin User B only can do Add/Change/Remove on Group B of IP Phones?
Are these possible?
Would appreciated if someone can shed some light on this as I have spent a lot of time but couldn't find any information about these.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...