Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CMM image

Native 6509 with CMM voice module. When upgrade IOS in the supervisor module, does the CMM module auto upgraded, is there a seperate module image for CMM that we apply seperately if need to upgrade CMM for some bug? Thanks

3 REPLIES
Hall of Fame Super Red

Re: CMM image

Hi CF,

CMM has its own software image; the image is not bundled with the supervisor engine or MSFC images.

Software Upgrade Procedure

From this doc;

Release Notes for the Cisco Catalyst 6500 Series and the Cisco 7600 Series Communication Media Module for Cisco IOS Release 12.3(8)XY

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_6314.htm#wp156843http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_6314.htm#wp156843

Hope this helps!

Rob

New Member

Re: CMM image

Thanks very much. So in order to configure CMM, we have to use session command going to the module and configure it as to the other module, like 6608? Thanks

Hall of Fame Super Red

Re: CMM image

Hi CF,

You are most correct :) You will use session command (session slot x processor 0) where x is your module number.

Hope this helps!

Rob

142
Views
4
Helpful
3
Replies
CreatePlease to create content