Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

codec complexity

What's the default codec complexity on 2851 router? Flex, medium or high? do I need to change the codec to high in order to support G729 over the IP?

3 REPLIES
Hall of Fame Super Gold

Re: codec complexity

flex. You don't need to configure anything to use codecs as you like.

Hope this helps, please rate all useful posts!

New Member

Re: codec complexity

But if you read this link, it shows the command to change codec complexity in order to support different codec type.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801ea415.html

Hall of Fame Super Gold

Re: codec complexity

The document is about the network module with codecs on board. You don't need that on the 2851. Newer routers like the 28xx and 38xx with onboard codecs (pvdm2) doesn't neeed these commands.

506
Views
0
Helpful
3
Replies
CreatePlease to create content