My customer is having an IP link to make international VoIP calls. The codec used in these trunk is G.729. But the problem is that the other end gateway will accept G.729 calls only with a payload of 30. By default the payload size for G.729 in Call Manager is 20, and this is the same used for their other internal VoIP calls.
If you want to change the payload, as far as I Know it has to be done under the Service parameters and will affect globally.
Because of this issue, we are not able to proceed with our integration. So please let me know if there is any way to change the payload type to 30 only for this particular trunk.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.