Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Codec Problems

Hi,

Can 7911's start the call with G729 directly without a transcoder or does it need a transcoder for starting g729 calls?

4 REPLIES
Cisco Employee

Re: Codec Problems

Whenever 2 endpoints support natively G729 there is no need to use an XCODER for the call

Cisco Unified IP Phone 7911G

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps6565/product_data_sheet0900aecd8039de52.html

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Codec Problems

ok then another question comes;

ServiceProviderGW----HQ----GW====GW---Branch

Can I make the branch ip phones talk G729 from the link which goes to the HQ, and then when they reach there turn them to g711 and then goes to the Service ProviderGW with g711... Is it possible ?

thanks

Cisco Employee

Re: Codec Problems

ServiceProviderGW----HQ----GW====GW---Branch

configure the GWs i point in different regions and have them talk G711 to do that

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Codec Problems

sorry but what do you mean by i point ?

147
Views
0
Helpful
4
Replies
CreatePlease login to create content