Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Combining iso files for CUCM 6

Being asked by the Cisco upgrade process to download a two part iso file and burn it to a single DVD. Working in a secure area my employer is not happy for me to use un-approved "downloaded of the net" s/w.

Question is what does Cisco recommend i use?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Combining iso files for CUCM 6

Hi Chris,

Here is an example of what is recommended by Cisco;

UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Upgrading From Cisco Unified Communications Manager Release 6.1(1x) or higher to Release 6.1(3) by Using the UCSInstall File

Because of its size, the UCSInstall iso file, UCOS_6.1.3.1000-16.sgn.iso, comprises two parts:

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2

Procedure

Step 1From www.cisco.com, download the two UCSInstall files.

Step 2Execute one of the following commands to reunite the two parts of the file.

NoteThe 6.1.3.1000-16 build represents a non-bootable ISO that is only useful for upgrades. You cannot use it for new installations.

a.If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

b.If you have a Windows system, cut and paste the following command from this document into the command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2+UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Step 3Use an md5sum utility to verify that the MD5 sum of the final file is correct.

417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

From these Release Notes;

http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf

Hope this helps!

Rob

1 REPLY
Hall of Fame Super Red

Re: Combining iso files for CUCM 6

Hi Chris,

Here is an example of what is recommended by Cisco;

UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Upgrading From Cisco Unified Communications Manager Release 6.1(1x) or higher to Release 6.1(3) by Using the UCSInstall File

Because of its size, the UCSInstall iso file, UCOS_6.1.3.1000-16.sgn.iso, comprises two parts:

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2

Procedure

Step 1From www.cisco.com, download the two UCSInstall files.

Step 2Execute one of the following commands to reunite the two parts of the file.

NoteThe 6.1.3.1000-16 build represents a non-bootable ISO that is only useful for upgrades. You cannot use it for new installations.

a.If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

b.If you have a Windows system, cut and paste the following command from this document into the command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2+UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Step 3Use an md5sum utility to verify that the MD5 sum of the final file is correct.

417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

From these Release Notes;

http://www.cisco.com/web/software/282074295/24094/ciscocm-6-1-3.Readme.pdf

Hope this helps!

Rob

2810
Views
8
Helpful
1
Replies