Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Communication manager 6 (call manager) 2821 EVM-HD-8FXS/DID

Hi,

I've got a 2821 with 5 BRI and 4 fax on this EVM-8FXS modules. (EVM-HD-8FXS/DID)

I've configured the gateway in call manager.

Everything is going well with the IP Phones.

The fax could send faxes outside and between them but they can't receive faxes...

I've got a busy tone :

Here is a rejected call :

Aug 13 10:26:04.918: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x01

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Exclusive, B1

Calling Party Number i = 0x0183, '0033625672382'

Plan:ISDN, Type:Unknown

Called Party Number i = 0x81, '350'

Plan:ISDN, Type:Unknown

Aug 13 10:26:04.946: ISDN BR0/1/1 Q931: TX -> CALL_PROC pd = 8 callref = 0x81

Channel ID i = 0x89

Exclusive, B1

Aug 13 10:26:04.962: ISDN BR0/1/1 Q931: TX -> DISCONNECT pd = 8 callref = 0x81

Cause i = 0x80A9 - Temporary failure

Help will be greatly appreciated...

Regards

Charles

2 REPLIES
New Member

Re: Communication manager 6 (call manager) 2821 EVM-HD-8FXS/DID

Here is a dna analisys showing that we go to the right port :

New Member

Re: Communication manager 6 (call manager) 2821 EVM-HD-8FXS/DID

I have done some tests with a phone connected to the fxs port (to avoid fax problems)...

From one IP Phone I could dial, from another one I can't. There is no partition or CSS configured...

189
Views
0
Helpful
2
Replies
CreatePlease to create content