01-18-2012 12:46 PM - edited 03-16-2019 09:05 AM
Hi Guys
I have a question. Are the Catalyst 6606 MGCP and CUCM 8.6 compatible?
TIA
Cristian Munoz.
01-18-2012 01:17 PM
Hi Christian,
I'm not sure if you meant 6606 or perhaps the 6608 blade?
If it's the 6608 then yes, it's still supported
Default Loads for Cisco Unified Communications Manager Release 8.x (Table 31)
Equipment Description | 8.6(2a) | 8.6(2) | 8.6(1a) | 8.5(1) | 8.0(3a) | 8.0(2c) |
---|
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp302755
Cheers!
Rob
Please remember to tag your threads and help support "Teachers without Borders"
https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity
01-18-2012 02:39 PM
Dear Rob
Thanks for you answer.. I have the same information, but I can´t find interoperability using WS-X6600-6E1 Blade.
Regards..
Cristian.
01-18-2012 04:48 PM
Hi,
Here is a doc for CUCM 8.6.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08gw.html
Look at table 38-3
Cisco Communication Media Module (WS-X6600-6E1) | H.323 | E1 PRI |
So looks like it is supported but as H323
Still a valid reliable protocol.
Regards
Alex
01-18-2012 06:52 PM
My suggestion would be to get the blades replaced with ISR G2 gateways as even though they may still be supported in CUCM, the blades themselves have been EOS/EOL for some time.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide