Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Compatibility between Catalyst 6606 MGCP and CUCM 8.6

Hi Guys

I have a question. Are the Catalyst 6606 MGCP and CUCM 8.6 compatible?

TIA
Cristian Munoz.

4 REPLIES
Hall of Fame Super Red

Compatibility between Catalyst 6606 MGCP and CUCM 8.6

Hi Christian,

I'm not sure if you meant 6606 or perhaps the 6608 blade?

If it's the 6608 then yes, it's still supported

Default Loads for Cisco Unified Communications Manager Release 8.x (Table 31)

Equipment Description
8.6(2a)
8.6(2)
8.6(1a)
8.5(1)
8.0(3a)
8.0(2c)

Digital Access WS-X6608

cmterm-6608-4.0.0.32-mgcp.copsgn

cmterm-6608-4.0.0.32-mgcp.copsgn

cmterm-6608-4.0.0.32-mgcp.copsgn

cmterm-6608-4.0.0.32-mgcp.copsgn

cmterm-6608-4.0.0.32-mgcp.copsgn

cmterm-6608-4.0.0.32-mgcp.copsgn

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp302755

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

New Member

Compatibility between Catalyst 6606 MGCP and CUCM 8.6

Dear Rob

Thanks for you answer.. I have the same information, but I can´t find interoperability using WS-X6600-6E1 Blade.

Regards..

Cristian.

Green

Re: Compatibility between Catalyst 6606 MGCP and CUCM 8.6

Hi,

Here is a doc for CUCM 8.6.1
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08gw.html

Look at table 38-3

Cisco Communication Media Module (WS-X6600-6E1)

H.323

E1 PRI

So looks like it is supported but as H323

Still a valid reliable protocol.

Regards

Alex

Regards, Alex. Please rate useful posts.
Hall of Fame Super Silver

Compatibility between Catalyst 6606 MGCP and CUCM 8.6

My suggestion would be to get the blades replaced with ISR G2 gateways as even though they may still be supported in CUCM, the blades themselves have been EOS/EOL for some time.

Chris

337
Views
0
Helpful
4
Replies
CreatePlease login to create content