will i be able to make calls from the ip phones to this computer , and how i install it to the call manger , same way i install the ip phones (device->phones -> add an ip phone-> what do i chose in the model tab ?)
First you need to download that software from Cisco site ( search it on cisco download section) and yes in same way you need to add this softphone in Call Manager ( device-phone-add- cisco ip communicator ).
If you cant see "Cisco IP communicator" option in add phone then CCM 3 will not support this softphone.
I am not sure the CCM 3 supports Third party SIP phones or not. If you see something like Third Party SIP (Basic/Advanced ) then you can download freeware SIP phone software from Internet and add it as SIP phone in CCM. That also will do the trick.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...