Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Conect PBX to Router 2800

I wonder if you could help me telling me if there is a way to connect a Nortel PBX supports only signaling type R1-itu T1/E1 card by connecting it with a Cisco 2800 router?

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Les,Same URLCisco 1750 and

Les,

Same URL

Cisco 1750 and Cisco 1751

ds0-group ds0-group-number timeslots timeslot-list [service service-type] type {e&m-fgb | e&m-fgd | e&m-immediate-start | fgd-eana | fgd-os | fxs-ground-start | fxs-loop-start | none | r1-itu | r1-modified | r1-turkey}

no ds0-group ds0-group-number

Cisco IOS Release 12.1 and Earlier Releases

Cisco 1750 and Cisco 1751

ds0-group ds0-group-number timeslots timeslot-list [service service-type] type {e&m-fgb | e&m-fgd | e&m-immediate-start | fgd-eana | fgd-os | fxs-ground-start | fxs-loop-start | none | r1-itu | r1-modified | r1-turkey | sas-ground-start | sas-loop-start}

 

So looks like yes you can use a 1751 for r1-itu support

Also from the compatability matrix you can use a VWIC-2MFT-T1 in a 1751
http://www.cisco.com/c/en/us/support/docs/routers/2600-series-multiservice-platforms/5111-voice-comp-matrix.html#platform


Hope this helps
Regards
Alex

Please rate useful posts

Regards, Alex. Please rate useful posts.
3 REPLIES
Green

Hi,See this link:=http://www

Hi,

See this link:=
http://www.cisco.com/c/en/us/td/docs/ios/voice/command/reference/vr_book/vr_d2.html#wp1452165


Under ds0-group E1
Cisco 2691, Cisco 2600XM Series, Cisco 2800 Series (Except Cisco 2801), Cisco 3660, Cisco 3700 Series, Cisco 3800 Series
ds0-group ds0-group-number timeslots timeslot-list type {e&m-delay-dial | e&m-immediate-start | e&m-lmr | e&m-melcas-delay |
e&m-melcas-immed | e&m-melcas-wink | e&m-wink-start | ext-sig | fgd-eana | fxo-ground-start | fxo-loop-start | fxo-melcas |
fxs-ground-start | fxs-loop-start | fxs-melcas | r2-analog | r2-digital | r2-pulse}

Under ds0-group E1
Cisco 2691, Cisco 2600XM Series, Cisco 2800 Series (Except Cisco 2801), Cisco 3660, Cisco 3700 Series, Cisco 3800 Series
ds0-group ds0-group-number timeslots timeslot-list type {e&m-delay-dial | e&m-fgd | e&m-immediate-start | e&m-lmr | e&m-wink-start |
ext-sig | fgd-eana | fgd-emf [mf] [ani-pani] [ani] | fxo-ground-start | fxo-loop-start | fxs-ground-start | fxs-loop-start}


R1-itu is NOT supported on the 2800 series

Hope this helps
Regards
Alex

Regards, Alex. Please rate useful posts.
New Member

Hi Alex,Would a Cisco 1751-V

Hi Alex,

Would a Cisco 1751-V do the trick? could we swap the VWIC-2MFT-T1 from the 2800 to a 1751? I'm unable to find configuration examples of MF R1 signaling types being used via the 1751.

Nortel PBX (MF R1 Signaling) connected to 1751? our final goal is have the other end of the VPN running VoIP. Its a little tricky...

Thank you for your help

Les

 

Green

Les,Same URLCisco 1750 and

Les,

Same URL

Cisco 1750 and Cisco 1751

ds0-group ds0-group-number timeslots timeslot-list [service service-type] type {e&m-fgb | e&m-fgd | e&m-immediate-start | fgd-eana | fgd-os | fxs-ground-start | fxs-loop-start | none | r1-itu | r1-modified | r1-turkey}

no ds0-group ds0-group-number

Cisco IOS Release 12.1 and Earlier Releases

Cisco 1750 and Cisco 1751

ds0-group ds0-group-number timeslots timeslot-list [service service-type] type {e&m-fgb | e&m-fgd | e&m-immediate-start | fgd-eana | fgd-os | fxs-ground-start | fxs-loop-start | none | r1-itu | r1-modified | r1-turkey | sas-ground-start | sas-loop-start}

 

So looks like yes you can use a 1751 for r1-itu support

Also from the compatability matrix you can use a VWIC-2MFT-T1 in a 1751
http://www.cisco.com/c/en/us/support/docs/routers/2600-series-multiservice-platforms/5111-voice-comp-matrix.html#platform


Hope this helps
Regards
Alex

Please rate useful posts

Regards, Alex. Please rate useful posts.
165
Views
0
Helpful
3
Replies