Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Conference Bridge - HCB

Hi

My router currently has a "profile conference" which supports 18 conference with 16 participants

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum conference-participants 16

maximum sessions 18

associate application SCCP

It is possible to support a conference of 32 participants and holding conferences of 16 participants?

If this is possible would have a guide on how to accomplish this?

NOTE: You should assume that the router has the necessary DSP to support the conference.

In addition the server is a cisco callmanager 8.6 with Cisco IOS Enhanced Conference Bridge

Greetings and thanks for your help

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Conference Bridge - HCB

The router will not know, CUCM controls all that via MRG and MRGL, you'll need to adjust that in CUCM as you need.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
6 REPLIES
Hall of Fame Super Silver

Conference Bridge - HCB

With G729 codec in the profile 16 is the max:

http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_m1.html#wp1439640

You could change the profile to only use G711 and then change the max-participants to 32, and add a transcoder profile to be engaged when remote users need to be added to the conference.

HTH,

Chris

New Member

Conference Bridge - HCB

Hi Chris,

Currently my router can support

6 conference of 32 participants or 18 conferences of 16 participants

I have a PVDM3-256

It is possible to support 32 conferences of 8 participants and a conference of 32 participants

?

Cisco Employee

Conference Bridge - HCB

The CFB reserves the resources for the maximum number of participants for each conference once you configure it, this is not dynamic.

You would need to specifically create a profile for 32 conferencees, and that would be the max number of conferencees you will get on PVDM3 since you have G729 in the profile. With only G711 you can go as high as 64 participants.

Assuming you have not used that PVDM for anything else, you could still configure around 35 conferences of 8 users with the same dspfarm profile.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference Bridge - HCB

Hi Jaime

Thanks for your answer.

with this setup  can I have 18 conferences of 16 participants and conference of 32 participants.

sccp ccm group 999

bind interface GigabitEthernet0/0

associate ccm 1 priority 1

associate profile 1 register NOMBREX

associate profile 2 register NOMBREZ

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum conference-participants 16

maximum sessions 18

associate application SCCP

!

!

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum conference-participants 32

maximum sessions 1

associate application SCCP

and  configure a MRG  with these 2 CFB

Greetings and thanks for your help

New Member

Conference Bridge - HCB

Hi,

I have an additional question.

how the router should to know which profile has to use (16 participants or 32 participants)?

thanks for your help

Cisco Employee

Conference Bridge - HCB

The router will not know, CUCM controls all that via MRG and MRGL, you'll need to adjust that in CUCM as you need.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
238
Views
0
Helpful
6
Replies