Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Conference Call Fails

Hi,

I am having trouble getting Conference Calls to work. I call a phone and after the call is active, press the Confrn button, dial the second line and call is active but as soon as I press Confrn again to bring them all together the two phones called drop with a "call failed" with fast busy. The original calling phone looks like it is connecting to the conference as it stays active with "To Conference" on the screen as the called party. Looks like a have a permissions issue somewhere with a partion or something but I cannot find anything.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Conference Call Fails

looks like you're using G729 and a SW CFB, SW CFB can only handle G711.

check the codecs involved

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

Re: Conference Call Fails

looks like you're using G729 and a SW CFB, SW CFB can only handle G711.

check the codecs involved

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference Call Fails

Thanks, helped put me on the right track and got it fixed.

New Member

Re: Conference Call Fails

I'm having a similar problem at the moment. Same symptoms, all problem phones are in the same region - G711. Any ideas?

New Member

Re: Conference Call Fails

Is the CFB registred to the CUCM and is the CFB availiable in the wright MRG / MRGL applied to the devices ?

Hope this help

Guy

209
Views
0
Helpful
4
Replies