Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Conference Call with CUCM 7.0(2)

Hi guys,

I have CUCM cluster with three nodes, three diferent devices pools and different regions, only g.711 is being used.

When i start a conference using cnfr button from 7911 phone the first call stays in stand by and the new call is on, then i press cnfr again i the call is dropped.

I have sw conference bridge configured in CUCM.

Do i need conference hardware resources for three or more users?

Thanks.

Regards,

NC

10 REPLIES
Cisco Employee

Re: Conference Call with CUCM 7.0(2)

No, have you tried restarting the IPVMS?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference Call with CUCM 7.0(2)

HI javalenc ,

Yes, i try that without success

I have two button (conference and participate) i try everything and nothing works.

Cisco Employee

Re: Conference Call with CUCM 7.0(2)

If you try a meet-me does it work?

Just to confirm the CFB is up and running

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference Call with CUCM 7.0(2)

I have configured a meet-me number but only the first phone can dial the number, the Second receives a unavailable tone.

New Member

Re: Conference Call with CUCM 7.0(2)

OK, i can do conferenre if the phone is in the same location!

The meet me is not working because the meet me number only accepts one number.

Cisco Employee

Re: Conference Call with CUCM 7.0(2)

Do you have CAC configured?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference Call with CUCM 7.0(2)

No.

One external number can successefully join the conference.

Only internal different location phones are not working.

New Member

Re: Conference Call with CUCM 7.0(2)

The scenario is like this:

3 servers

3 sites

3 device pools

1 resource group per site

1 resource list per site

each resource list have 3 resource groups ordered

Meet me number only accept one phone call the second receives a unavailable tone

Ad Hoc conference works for external numbers and internal numbers in the same location, with the same device pool.

Each site can call successefully to another because each site have CSS for external and internal calls.

I have one cfb configured automatically for each site, with local device pool and location.

What i am missing here?

New Member

Re: Conference Call with CUCM 7.0(2)

If i change the region and set the same region for all the participants everything works for ad hoc conference :|

New Member

Re: Conference Call with CUCM 7.0(2)

Meet me is not working yet.

Ad hoc conference is working, i change the default values from region to use g.711 for the three sites...

576
Views
0
Helpful
10
Replies