Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Conference calls in CME

I have CME 7.1 and I need to implement conference calls up to 8 calls. So I added the following command:

max-conferences 8 gain -6

but I am not able to make conferences for more than 2 parties.

Shall I use conference bridge?

I have also the same problem with Music on hold, I used the command:

moh music-on-hold.au

but it does not work.

So any body can help me??

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Conference calls in CME

Note, moh is sent to external calls only. And, .AU files good for the router are difficult to produce, so just try the default file to begin with.

Please remember to rate useful posts with the scrollbox below.

3 REPLIES
Hall of Fame Super Gold

Re: Conference calls in CME

You need to follow the conferencing chapter in the administration guide, the configuration is explained there.

Community Member

Re: Conference calls in CME

thank you, but what about moh

I already have added the file (music-on-hold.au) to flash and under telephony service I added:

moh music-on-hold.au

but it does not work.

Hall of Fame Super Gold

Re: Conference calls in CME

Note, moh is sent to external calls only. And, .AU files good for the router are difficult to produce, so just try the default file to begin with.

Please remember to rate useful posts with the scrollbox below.

351
Views
0
Helpful
3
Replies
CreatePlease to create content