Your right as standard in CME you can only do a 3 person ad-hoc conference. CCM supports ad-hoc and also meetme conferencing which is done in software. The meetme conferencing will allow you to support over 3 parties.
If you want more than 3 in CCME then you need to use hardware based conferencing which uses dsps so you need to have extra PVDM installed. You can then use meetme and ad-hoc conferencing for over 3 parties. Also im pretty sure you need CCME 4.1 to be able to use meetme
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...