Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Conference configuration issue

Hi All

The following are the DSP setting our issue is we cannot start conference call (can start but only one person at a time )

We have onle one pvdm (PVDM3 16) and uses SIP line .

Should be create  ephone and ephone-dn while configure conference?

Here we have three conference station(model 7937).

please send me the correct configuration....

This is Very urgent case please update

sccp local GigabitEthernet0/0

sccp ccm 192.168.20.1 identifier 1 priority 1 version 7.0

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 3 register Trans-MTP

associate profile 2 register conference

!

dspfarm profile 3 transcode universal

codec g711ulaw

codec g711alaw

codec pass-through

maximum sessions 4

associate application SCCP

!

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729br8

maximum sessions 3

associate application SCCP

ephone-dn  150  octo-line

number 2870

description ad-hoc conference extension

conference ad-hoc

no huntstop

Ephone 50

mac-address xxxx.xxxx.xxxx

type 7937

5 REPLIES
Cisco Employee

Re: Conference configuration issue

The CME configuration guide has all the steps and samples for this, you need to review it in first place

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Conference configuration issue

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729br8

maximum sessions 3

associate application SCCP

Increase the maximum sessions in the above command to increase the number of people that can conference.

“If you have knowledge, let others light their candles in it.”

Conference configuration issue

hi amansin

thanks your replay

my ephone-dn and ephone configuraation is correct ? actualy 3 conference station used configure the same step?

New Member

Conference configuration issue

Hope you have configuration like below:

telephony-service

sdspfarm units 5

sdspfarm tag 1 conference

conference hardware

max-conferences 4 gain -6

and....

voice-card 0

  dspfarm

  dsp services dspfarm

...everything else should be fine..

What problem you are facing right now ?

“If you have knowledge, let others light their candles in it.”

Conference configuration issue

Hi amansin


Thank you very much Amansin  Everything work fine.......

voice-card 0

dspfarm

dsp services dspfarm

sccp local GigabitEthernet0/0

sccp ccm 192.168.20.1 identifier 1 priority 1 version 7.0

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 3 register Trans-MTP

associate profile 2 register conference

!

dspfarm profile 3 transcode universal

codec g711ulaw

codec g711alaw

codec pass-through

maximum sessions 4

associate application SCCP

!

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729br8

maximum sessions 3

associate application SCCP

telephony-service

sdspfarm units 5

sdspfarm transcode sessions 4

sdspfarm tag 2 conference

sdspfarm tag 3 Trans-MTP

conference hardware

ephone-dn  50  octo-line

number 2870

!

!

ephone-dn  51  octo-line

number A123

conference ad-hoc

preference 1

no huntstop

!

!

ephone-dn  52  octo-line

number A124

conference ad-hoc

preference 1

no huntstop

!

!

ephone-dn  53  octo-line

number A125

conference ad-hoc

preference 1

no huntstop

ephone  50

mac-address 0004.F2F0.0AA6

button  1:50

!

Thank you

Muhammed hismathvk

190
Views
10
Helpful
5
Replies
CreatePlease to create content