cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
297
Views
0
Helpful
1
Replies

Conference problems

Gilberto Marcos
Level 1
Level 1

Hello Every one I had Problems with conference in call manager version 7.0.2.20000-5   The issue here whe i make a call from one remote site to another and in the las site the person who receives the call make the conference, the first call is droped, this phone shows not enough bandwidth.

The location betwen sites has codec g.729 and locally g.711 could this can impact the conferences?

Thank you for your help.

1 Reply 1

Jaime Valencia
Cisco Employee
Cisco Employee

If you're using the SW CFB then you can only use G711. if you want to keep using G729 with SW CFB you need XCODER, or to use a HW CFB.

Depending on your configuration you might also have not allocated the necessary BW based on that "not enough BW" message, look at your location configurations and make sure enough BW is available.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: