I was able to get the
I'm using an older version of Asterisk, which did not support TCP, so I had to change the TransportLayer to "2" for UDP only since I'm only using UDP transport at the moment. There is probably a LOT more broken in this config file, but since I haven't achieved successful registration I haven't cleaned it up. But it does TRY to register to my Asterisk server, at least.
The problem: the password doesn't seem to work. I simplified it, made all of the authentication and extension nomenclature the same (3127) and even validated that the Asterisk server was correctly working by testing another SIP client on the same credentials. But the 8831 doesn't want to register. I see it trying, but it gets a bad password response (authentication failure.) I've tried multiple passwords to see if it's just a short/long problem - no go. Latest versions of Asterisk were used as of 2016/01/15.
Has anyone been able to successfully get an 8831 registered or calling to Asterisk?
[asterisk.blah.com tftpboot]# cat SEPAC44F2152195.cnf.xml
<?xml version="1.0" ?>
<device>
<vendorConfig>
<wirelessMicRegion>0</wirelessMicRegion>
<settingsAccess>1</settingsAccess>
<webAccess>1</webAccess>
<moreKeyReversionTimer>5</moreKeyReversionTimer>
<g722CodecSupport>0</g722CodecSupport>
<enableCdpSwPort>0</enableCdpSwPort>
<enableLldpSwPort>0</enableLldpSwPort>
<lldpAssetId>8</lldpAssetId>
<powerPriority>0</powerPriority>
<displayRefreshRate>0</displayRefreshRate>
<useEnblocDialing>1</useEnblocDialing>
<sshAccess>0</sshAccess>
<sshPort>22</sshPort>
</vendorConfig>
<loadinformation>ip8831.10-3-1SR2-2</loadinformation>
<deviceProtocol>SIP</deviceProtocol>
<transportLayerProtocol>2</transportLayerProtocol>
<webAccess>0</webAccess>
<sshUserId>admin</sshUserId>
<sshPassword>nottherealpassword</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>D.M.Y</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp>
<name>128.138.141.172</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<processNodeName>204.210.2.69</processNodeName>
<ports>
<sipPort>5060</sipPort>
</ports>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<natEnabled>false</natEnabled>
<natAddress></natAddress>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
<outboundProxy></outboundProxy>
<outboundProxyPort></outboundProxyPort>
<backupProxy>204.210.2.69</backupProxy>
<backupProxyPort>5060</backupProxyPort>
</sipProxies>
<phoneLabel>THE-PHONE</phoneLabel>
<sipLines>
<line button="1">
<featureID>9</featureID>
<featureLabel>Line1</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>3127</name>
<displayName>Line1</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>3127</authName>
<authPassword>9999</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>1</messageWaitingLampPolicy>
<messagesNumber>*97</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>3127</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<dialTemplate>dialplan.xml</dialTemplate>
</sipProfile>
<userLocale>
<name>English_United_Kingdom</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>English_United_Kingdom</networkLocale>
<networkLocaleInfo>
<name>English_United_Kingdom</name>
</networkLocaleInfo>
</device>
[asterisk.blah.com tftpboot]#
