Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Conferencing with the Video Advantage Camera

We have started deploying the Cisco Video Advantage Camera?s and have run into very few problems or issues. While testing yesterday I tried to set up a 3-way conference call with 2 other individuals that had cameras as well. The first caller and I had voice and video, I hit the conference key, called the 2nd party and he and I had voice and video as well. As soon as I joined all 3 of us together, the audio conferences but the video does not. What am I missing????

5 REPLIES
Silver

Re: Conferencing with the Video Advantage Camera

you might be hitting with the bandwidth constraints. change the region wise bandwidth allcoation

New Member

Re: Conferencing with the Video Advantage Camera

I had thougt about that and in our test area I upped the band width available to video (doubled it from 384 to 768) and still had the same results

New Member

Re: Conferencing with the Video Advantage Camera

I'm pretty sure 3 way video conferences are not supported. We run VT advantage and see the same exact behavior. We done 3-way with MCU's and polycomms acting as the conference bridges.

Re: Conferencing with the Video Advantage Camera

CallManager does not support video conferencing. Are you using any kind of MCU device?

New Member

Re: Conferencing with the Video Advantage Camera

Unless you have an MCU you can only have a one on one video call through call manager. Once you add a third member the video drops.

So what you experience is the correct behaviour.

140
Views
0
Helpful
5
Replies