09-03-2013 02:14 PM - edited 03-16-2019 07:11 PM
Hello fellow NetPros
We'll be starting a new Cisco IP Telephony project in Brazil next week. Since this is our first install for Brazil we have some doubts regarding the E1 trunks form the service provider. Aside from trying to get this information from the service provider (Embratel) I would like to know If anyone here has implemented E1 ISDN PRI trunks from Embratel and what the recommended configuration would be.
Best regards.
09-03-2013 02:44 PM
PRi is the same everywhere. Configuration is the same as other E1 countries.
09-03-2013 04:36 PM
Here is what worked for me:
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
isdn switch-type primary-net5
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31
HTH,
Chris
09-11-2014 07:59 AM
Thanks Chris this config also works in Lima, Peru.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide