Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Configuration of Dial Plans and Dial Peers. Please Help.

What is the configuration of Inbound/Outbound for a specific

Ephone-Dn and destination-pattern prefix for an open line that can be able to dial (International,National, etc.) for a specific Ephone-Dn as well. Please include the "9" button to place a call. We have a 48 analog lines FXS/FXO on a Cisco 3845 Router. This is a sample of current configuration and number for placing an international call in this country.

dial-peer voice 100 pots

numbering-type unknown

destination-pattern 05.......

no digit-strip

port 1/0/8

!

ephone-dn 1

number 1000

label SG

description 1000

name SG

hold-alert 30 originator

!

ephone 2

mac-address 001D.A21A.046C

button 1:1

!

Dialing procedure for International Call.

00 or +(International Call) 966(Country Code) 1 or 01(Area Code) 4410215(Telephone Number)

1 REPLY
Bronze

Re: Configuration of Dial Plans and Dial Peers. Please Help.

For complete step-by-step instructions on implementing dial plans by configuring dial peers and using dial peer matching and digit manipulation features, refer to Configuring Dial Plans, Dial Peers, and Digit Manipulation.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a0080080aec.html

128
Views
0
Helpful
1
Replies
CreatePlease to create content