Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration of SIP DTMF with a CUCM 6.1

Hi all,

We are facing a problem with the interconnection between GSM voice gateway and a CUCM 6.1 server. One of our call center number is a GSM number; so we put a GSM sim card in a GSM voice gateway; but when you dial that number you have the welcome prompt and when you dial 1 for French or 2 for English and the CUCM does not interpret this digit. We created a SIP trunk between the GSM voice gateway and the call manager. Is that the correct procedure or do we need to go through a Cisco Voice gateway? Can someone send the procedure of how do this configuration?

Thanks,

1 REPLY
Silver

Re: Configuration of SIP DTMF with a CUCM 6.1

CCM 6.x is recommended to keep MTP Required check box disabled. SIP end users can not receive calls from ip phones connected to CCM 6.1.

Configuring SIP DTMF Features

http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/chapter8.html

SIP DTMF Features per IOS release:

http://www.cisco.com/en/US/docs/ios/12_3/sip/configuration/guide/sipftgde.html

178
Views
0
Helpful
1
Replies