Good morning, would want to receive, if possible, information on as to configure the telephones IP Mod. 3911. I know that it is necessary to send a file of configuration to the telephones in formed XML, through a server TFTP. We in firm don't have a server TFTP, I have connected the telephones to the local net through a door PoE, the telephone through DHCP read the parameters of base, but I have necessity to also insert to the inside the parameters of our provider. How can I do?
when you're using cisco phones without a cisco call manager, you will have to find out all and any details by yourself, because cisco never fully disclosed the XML fields, although these are quite easy to figure out.
You best source of information is voip-info.org, search for 7961 sip as the tags are the same.
Note you can have many problem getting the phone to work, because it doesn't support STUN and other things that needed for consumer-grade deployment.
Dear Mr. Bevilacuq, I thank you for the answer, I have verified on the site that has pointed out me and indeed the system of configuration of the telephones is very complicated. Can you furnish me some information on thing kindly it is a cisco call manager and to thing it serves?
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.