Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure 0800XXX number

Hi

I have Cisco Call manger Express 8.0 .

i need to setup a Dummy number 0800XXXXX in CME.

whenever any user will call this number , that call should be answered by a person in the office.

If this is possible, can anyone tell me the procedure of doing the same .

Thanks a Ton in advance !!!!

4 REPLIES
Blue

Configure 0800XXX number

Hi

Configure Ephone-dn with the desired number. and Assign this dn to ephone of the person who will answer the call.

Regards

Ronak patel

Please rate helpful posts.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
Hall of Fame Super Silver

Configure 0800XXX number

Not sure if you can define an ephone-dn that covers a range.  You can build a translation rule that translates the range into a specific number that is assigned to the person you want the  calls to go to, here is an example:

voice translation-rule 1

rule 1 /^0800...../ /5555/

!

voice translation-profile Block

translate called 1

and then assign this profile under telephony-service.  You may also be able to use num-exp if you like.

HTH,

Chris

New Member

Configure 0800XXX number

Thanks a Lot , chris .. yes translation pattern works .. Cheers !!!!!!

Hall of Fame Super Silver

Configure 0800XXX number

Awsome, great it worked for you!

Please rate all  useful posts!

Chris

208
Views
0
Helpful
4
Replies
CreatePlease login to create content