01-26-2012 07:56 PM - edited 03-16-2019 09:14 AM
I have a 7921 wireless ip phone. I downloaded and installed the 7921 usb install tool, followed directions exact, tried it on 2 different PCs, it wont connect or even ping the phone at designated ip 192.168.1.100. Is there another method? the only missing instruction was the default gateway, but I expect that isnt needed if all on same net. They had a contractor setup their cisco system but no notes or howtos.
craig
01-27-2012 03:11 AM
Hello,
You can always configure manually. Remember that when you go into the config, you have to open the lock pressing **# and then make the changes, apply, and so on.
hope this helps
01-27-2012 03:14 AM
Hey Craign,
Take a look on this guide
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan_ch10.html
You have to configure the credentials of your wireless network, SSID
Regards
01-27-2012 07:57 PM
Manual worked perfect
Thx
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide