Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Configure Auto Attendants without IPCC CUCM 7.X

How do I configure the Cisco Four Port IP Auto-Attendant Application on a CallManager Server without IPCC in call manager 7.X or later,I want when an incoming call to my Company from PSTN could interact with a script that will ask the caller to press 0 for operator or to enter the extensiton to reach the user directly if the caller already know the extension.

10 REPLIES
New Member

Configure Auto Attendants without IPCC CUCM 7.X

Hello D_Lebedev,

Thanks for your reply But this documents is for AA with IPCC and I need to do it without an IPCC Server and the second for AC which is not My Case,So anyone have any ideas how to configure it without the need for IPCC(Just the call manager 7.x) Thanks

New Member

Configure Auto Attendants without IPCC CUCM 7.X

Sorry,but as i know there is no way to do this with UCM only.

If no IPCC,you will need Cisco Unity at last.

Green

Configure Auto Attendants without IPCC CUCM 7.X

Hi,

Looking at the documentation

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsaa.html

Yes you can install an AA but it needs to run on a CRS platform. (A seperate server)

If you have Unity or Unity Connection you can use the call routing and call handler function

to deploy an AA.

HTH

Alex

Regards, Alex. Please rate useful posts.

Configure Auto Attendants without IPCC CUCM 7.X

greeting acampbell,

What about doing this via basic IVR TCL script is there a way to do it?

I found a a document that do this without IPCC but for Call manager 4 but not for version 7.x:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008015bf9f.shtml#five

Green

Configure Auto Attendants without IPCC CUCM 7.X

Hi,

TCL is out of my depth.

But I found this link.

http://developer.cisco.com/web/vgapi/forums/-/message_boards/view_message/3041674

HTH

Alex

Regards, Alex. Please rate useful posts.
Cisco Employee

Configure Auto Attendants without IPCC CUCM 7.X

Yes it can be achieved using TCL script. There is a sample AA TCL script available on CCO Download page. I couldnt spend time in locating that page but will do so if time permits later today.

HTH

GP

Configure Auto Attendants without IPCC CUCM 7.X

Hi Gajanan,

I found the TCL script in the cme download Page,But I am still figuring out how to do it I am going to test it first hope it work I will keep you all updated with the behaviour thanks

Cisco Employee

Configure Auto Attendants without IPCC CUCM 7.X

Sure, I'll be interested to know the outcome. If you need any programming related assistance with TCL scripts, please visit developer.cisco.com . There also queries can be posted on developer forum.

My 2 cents.

GP.

New Member

Configure Auto Attendants without IPCC CUCM 7.X

I am trying to apply this on C7206VXR (IOS=c7200-adventerprisek9-mz.151-4.M2.bin) but it give me this message and the script not working at all :

Everything look cool I review the configuration Iand I matched the dial-peer for incoming call and it is running the script

So I appreciate if any one are familiar with it:

*Nov 30 21:40:09.243: //-1//AFW_:/Vxml_Link: Vxml Base Package not available

*Nov 30 21:40:09.255: //-1//AFW_:/Vxml_Link: Vxml Base Package not available

*Nov 30 21:40:09.267: //-1//AFW_:/Vxml_Link: Vxml Base Package not available

*Nov 30 21:40:09.279: //-1//AFW_:/Vxml_Link: Vxml Base Package not available

*Nov 30 21:40:09.291: //-1//AFW_:/Vxml_Link: Vxml Base Package not available

*Nov 30 21:36:42.539: //5//TCL :/tcl_PutsObjCmd: proc act_Setup

*Nov 30 21:36:42.543:

*Nov 30 21:36:42.547: //5//TCL :/tcl_PutsObjCmd:

proc init_perCallvars

*Nov 30 21:36:42.551:

*Nov 30 21:36:42.555: //5//TCL :/tcl_PutsObjCmd:

ANI 5001

*Nov 30 21:36:42.559:

*Nov 30 21:36:42.563: //5//TCL :/tcl_PutsObjCmd:

DNIS 4010 *Nov 30 21:36:42.539: //5//TCL :/tcl_PutsObjCmd: proc act_Setup
*Nov 30 21:36:42.543:
*Nov 30 21:36:42.547: //5//TCL :/tcl_PutsObjCmd:
proc init_perCallvars
*Nov 30 21:36:42.551:
*Nov 30 21:36:42.555: //5//TCL :/tcl_PutsObjCmd:
ANI 5001
*Nov 30 21:36:42.559:
*Nov 30 21:36:42.563: //5//TCL :/tcl_PutsObjCmd:
DNIS 4010

837
Views
0
Helpful
10
Replies
CreatePlease login to create content