Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configure cisco VG224 using MGCP protocol

Hi Team,

I would like to know, How to configure Cisco VG224 using MGCP

1.What Configuration will do on VG 224

2.What Configuration will do Call Manager 8.6

Regards,

Praful S.

Everyone's tags (1)
3 REPLIES
Hall of Fame Super Gold

Configure cisco VG224 using MGCP protocol

You should use SCCP with Vg224 on CM. Not MGCP.

Cisco Employee

Re: Configure cisco VG224 using MGCP protocol

Config is pretty much the same as for any ISR if you want MGCP on the VG224

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
VIP Super Bronze

Configure cisco VG224 using MGCP protocol

Paolo-

It is common to configure FXS ports for MGCP control since SCCP doesn't support protocol-based T.38 switchover. This is typically required (as opposed to NSE-based switchover) in environments that have a third-party fax server.

For the original question:

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server

ccm-manager download-tones

ccm-manager config

mgcp

!Possibly related commands if the hardware will be doing faxing, esspecially T.38v0.

mgcp modem relay voip mode nse gw-controlled

mgcp package-capability fm-package

mgcp fax t38 ls_redundancy 2

mgcp fax t38 hs_redundancy 2

mgcp package-capability fxr-package

no mgcp fax t38 inhibit

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify helpful or
766
Views
5
Helpful
3
Replies