Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Configure Expansion Module 7916 on CME 7.1

Hi

We have CME version 7.1, and have connected 2 Nos 7916 to Cisco 7942G IP Phones. How do we make the expansion modules to work. Is there any specific configuration for the expansion modules?

Thanks.

3 REPLIES
Hall of Fame Super Gold

Re: Configure Expansion Module 7916 on CME 7.1

You only need the correct firmware and type configuration under ephone.

Community Member

Re: Configure Expansion Module 7916 on CME 7.1

But is the 7916 compatible with 7942?

also does Double Cisco Unified IP Phone Expansion Module require separate power supply or can the double expansion module work with the inline power from the cisco ip phone?

Hall of Fame Super Gold

Re: Configure Expansion Module 7916 on CME 7.1

Not with the 7942, but with the 7962. I did not read correctly the module in your first question.

I the phone has PoE, you only need a single PS for two modules.

Please remember to rate useful posts with the scrollbox below.

1553
Views
3
Helpful
3
Replies
CreatePlease to create content