Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configure features button of 6911 IP Phones on CME 9

Hello, I am Amadou Dia CCNA Voice.

I  had a cisco telephony project to deploy in 3 sites (One CME 2911 and  two CME 2901). I did the deployment correctly, now my problem is that i  have many 6911 IP Phones in the deployment and  i would like to know how  to configure the button of function  (pickup, meet me and others).

Can anyone help me please? it is urgent.

Cordialy,

Amadou Daouda DIA

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Configure features button of 6911 IP Phones on CME 9

You need to configure ephone-template to achive this.

Check the above link shared by Kevin.

Here is example from the doc...

enable

configure terminal

ephone-template template-tag

softkeys connected {[Acct] [ConfList] [Confrn] [Endcall] [Flash] [HLog] [Hold] [Join] [LiveRcd] [Park] [RmLstC] [Select] [TrnsfVM] [Trnsfer]}

softkeys hold {[Join] [Newcall] [Resume] [Select]}

softkeys idle {[Cfwdall] [ConfList] [Dnd] [Gpickup] [HLog] [Join] [Login] [Newcall] [Pickup] [Redial] [RmLstC]}

softkeys seized {[CallBack] [Cfwdall] [Endcall] [Gpickup] [HLog] [MeetMe] [Pickup] [Redial]}

exit

ephone phone-tag

ephone-template template-tag

end

5 REPLIES

Re:Configure features button of 6911 IP Phones on CME 9

Here is a link for your reference:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html


Kindly rate the post accordingly.

Regards,
Kevin
Sent from Cisco Technical Support Android App

Configure features button of 6911 IP Phones on CME 9

You need to configure ephone-template to achive this.

Check the above link shared by Kevin.

Here is example from the doc...

enable

configure terminal

ephone-template template-tag

softkeys connected {[Acct] [ConfList] [Confrn] [Endcall] [Flash] [HLog] [Hold] [Join] [LiveRcd] [Park] [RmLstC] [Select] [TrnsfVM] [Trnsfer]}

softkeys hold {[Join] [Newcall] [Resume] [Select]}

softkeys idle {[Cfwdall] [ConfList] [Dnd] [Gpickup] [HLog] [Join] [Login] [Newcall] [Pickup] [Redial] [RmLstC]}

softkeys seized {[CallBack] [Cfwdall] [Endcall] [Gpickup] [HLog] [MeetMe] [Pickup] [Redial]}

exit

ephone phone-tag

ephone-template template-tag

end

New Member

Configure features button of 6911 IP Phones on CME 9

Hello Kevin and Manish thanks for the answer i will test it and back to you the result. Thank you again

New Member

Configure features button of 6911 IP Phones on CME 9

Hello Kevin and Manish i have done by using the features-button on config template mode thanks for help.

#ephone-template template-tag

#feature-button 2 Pickup

#ephone 1

#ephone-template template-tag

Configure features button of 6911 IP Phones on CME 9

Thank you for the update and if you question is answered , then mark it as answered and rate all the useful posts.

Thanks

Manish

344
Views
0
Helpful
5
Replies
This widget could not be displayed.