configure FXO for faxing.

[nmanhertz]

I need help configuring my voice gateway 2851 FXO to forward fax to my ax server number, using CUCM 8.5.

- I have an analog line in my Canada office (FXO) and need all fax send to US fax server. -

Thanks,

Nigel Manhertz

[Chris Deren]

Configure the FXO port with plar that points to an extension that redirects the call to CUCM via a dial-peer (assuming GW is integrated to CUCM via SIP/H323), then in CUCM make sure you have a matching route pattern that redirects this call to the fax server (assuming it is already integrated).

HTH,

Chris

[nmanhertz]

Chris thanks for your response.

description:

The Fax server is not integrated into CUCM and the fax number is external to CUCM.

What I am trying to accomplish, is to have the FXO port form my remote office send to my corp fax server

voice-port 0/3/1

description << to fax >>

connecton plar opx ??? (does this ext have to be configured in CUCM)

dail-peer voice 10 pots

destination-pattern xxxxxxxxxx

port 0/3/1

the gateway I am using is configured in CUCM for my voice circuit (T1).

Thanks for any help,

Nigel M

[ashok_boin]

Hi Nigel,

No need to have this extension configured but the route to that number should be available.

Sent from Cisco Technical Support iPhone App